Browsing by Subject "gas turbine"
Now showing items 1-10 of 10
-
Oxidative coupling of methane (OCM) has been investigated through catalysis, reaction engineering and various processes to achieve the valued economic performance of producing ethylene from natural gas for more than 40 ...
-
(2018-07-11)The heat transfer study of a rectangular duct has become important as it can replicate the channel geometry of the turbine blade or vane in a real engine. The low aspect ratio channel represents trailing edge channel of ...
-
(2013-11-27)Various compound internal cooling techniques were investigated in this experiment to see which combinations can offer the greatest heat transfer. Combinations of rib turbulators as well as pin0fins were used in different ...
-
(2011-08-03)Gas turbine blade/vane cooling is obtained by circulating the high pressure air from compressor to the internal cooling passage of the blade/vane. Heat transfer and cooling effect in the rotating blade is highly affected ...
-
(2012-10-19)Applications of natural gases that contain high levels of hydrogen have become a primary interest in the gas turbine market. For reheat gas turbines, understanding of the ignition delay times of high-hydrogen natural gases ...
-
(2019-04-08)High speed turbomachinery uses tilting pad journal bearing (TPJB) to support rotor loads (static and dynamic). Over the years, continuous efforts have produced machines operating at increasing operating speeds and specific ...
-
(2018-07-31)The gas-to-liquid (GTL) industry is vulnerable to the variation of the oil and gas market price. This shortcoming has forced future GTL projects to be suspended and even cancelled. As one of the measures to overcome the ...
-
(Texas A&M University, 2005-02-17)This experimental study consists of two parts. For the first part, the film cooling effectiveness for a single row of seven cylindrical holes with a compound angle is measured on a flat surface using five different ...
-
Thermodynamic Modeling and Analysis of the Ratio of Heat to Power Based on a Conceptual CHP System (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2006)The CHP system not only produces electrical energy, but also produces thermal energy. An extensive analysis of the CHP market reveals that one of the most important engineering characteristics is flexibility. A variable ...
-
(2009-05-15)The turbine blade platform can be protected from hot mainstream gases by injecting cooler air through the gap between stator and rotor. The effectiveness of this film cooling method depends on the geometry of the slot, the ...